Graphite Pouring Nozzle for Continuous Casting & Molten Metal Flow Control
Product Overview
The graphite pouring nozzle is a high-temperature, wear-resistant flow control component used in continuous casting machines, foundry pouring systems, metal atomization equipment and molten metal transfer lines. Machined from high-density, thermally stable graphite, it provides a smooth, non-wetting bore that directs molten metal with controlled flow while resisting erosion, thermal shock and chemical attack from aluminum, copper, zinc, precious metals and other non-ferrous alloys.
Each graphite nozzle is precision machined with controlled inlet and outlet diameters, uniform bore geometry and custom mounting profiles including flanges, tapered seats, threaded sections and locating features. The non-wetting graphite surface reduces metal adhesion and solidified build-up, while the high thermal conductivity and low thermal expansion help the nozzle survive repeated hot metal contact. Custom designs can be produced to match original equipment, including multi-hole, converging and specialty profiles for atomization, billet casting and controlled pouring.
Jincheng supplies graphite pouring nozzles for foundries, continuous casting lines, powder atomization plants and high-temperature foundry systems. Every nozzle is inspected for dimensions, bore quality, surface defects and material grade before shipment.
Key Features
- High-temperature dimensional stability maintains bore geometry during repeated molten metal contact.
- Non-wetting graphite surface reduces metal adhesion, build-up and nozzle blockage between production runs.
- Excellent thermal shock resistance survives hot metal pouring and cooling cycles without cracking.
- Precision machined bore delivers controlled, consistent metal flow and reduced turbulence.
- Good erosion resistance against flowing metal, oxide particles and foundry process conditions.
- Custom mounting profiles including flanges, tapered seats, threads, grooves and locating features.
- Multiple nozzle geometries including converging, straight, multi-hole and atomization profiles.
- High-density low-porosity grades resist metal penetration and extend service life.
Technical Specifications
| Property | Value / Range |
|---|---|
| Material | High-density isostatic / molded graphite |
| Bulk Density | 1.75 – 1.90 g/cm³ |
| Ash Content | ≤ 0.1% |
| Shore Hardness | 48 – 65 HSD |
| Flexural Strength | 40 – 60 MPa |
| Compressive Strength | 70 – 125 MPa |
| Electrical Resistivity | 7 – 14 μΩ·m |
| Thermal Conductivity | 85 – 150 W/(m·K) |
| Coefficient of Thermal Expansion | 4 – 6 × 10⁻⁶ /K |
| Maximum Operating Temperature | 2800°C (inert); 600°C (air, coated options higher) |
| Standard Outer Diameter | 15 mm – 150 mm |
| Standard Bore Diameter | 3 mm – 100 mm |
| Length | 20 mm – 300 mm (custom available) |
| Surface Finish | Precision machined, smooth bore and seat |
Applications & How to Use
Continuous casting lines: Pouring nozzles for billet, strip and non-ferrous continuous casting flow control.
Metal powder atomization: Specialty nozzles directing molten metal into atomization systems for controlled powder production.
Foundry pouring systems: Flow control nozzles for crucibles, tundishes, ladles and automated foundry equipment.
Molten metal transfer: Bore components for aluminum, zinc, copper and precious metal transfer lines.
Custom high-temperature equipment: Replacement nozzles for original machinery and specialized foundry research systems.
How to use: Preheat the nozzle to remove moisture before metal contact, install with correct seating and controlled mounting force, and inspect the bore for build-up or erosion during routine maintenance. Avoid mechanical impact and use compatible gaskets or sealing features where required.
Why Choose Jincheng
- Extensive precision graphite machining experience with foundry and casting components.
- Custom bore and profile engineering based on flow rate, metal type and equipment design.
- High-density grades with non-wetting surfaces for reduced blockage and longer service life.
- Full CNC capability for complex seats, flanges, threads and multi-hole designs.
- Dimensional and surface inspection before shipment.
- Reverse engineering from worn nozzles or original equipment drawings.
- Large graphite stock supports fast replacement and prototype lead times.
- Protective packaging and responsive English engineering support.
Frequently Asked Questions
Q1: Can you produce nozzles for metal atomization?
Yes. We can machine specialized converging and custom bore profiles for atomization equipment based on flow rate, metal temperature and equipment specifications.
Q3: How do graphite nozzles resist metal adhesion?
The non-wetting graphite surface and high-density structure reduce wetting and solidified build-up, though periodic cleaning is still required for consistent production.
Q4: Can you match an existing nozzle seat or flange?
Yes. We can reverse engineer mounting profiles, tapered seats, flanges, threads and grooves from worn samples or equipment drawings.
Q5: What information is needed for a custom nozzle?
Please provide outer and bore dimensions, length, mounting profile, metal type, operating temperature, flow requirements and any relevant equipment drawings.
Hot Tags: graphite pouring nozzle for continuous casting & molten metal flow control, China graphite pouring nozzle for continuous casting & molten metal flow control manufacturers, suppliers, factory, graphite heating elements vacuum furnace, graphite parts, vacuum furnace graphite crucibles, vacuum furnace graphite parts, vacuum furnace graphite screws, vacuum furnace graphite seals
